8 channel remote mic pre

RedNet 4 adds eight of the Focusrite's premium remote-controlled mic preamps / line inputs to your Dante™ audio-over-IP system through a single Ethernet cable. With two selectable instrument inputs, RedNet 4 provides an effective range of analogue inputs for your system. The unit includes Focusrite's world-class precision A-D conversion. Mic/Line/Instrument selection, gain, phantom power, HPF and metering are also accessible from the front panel. The benefit of remote control microphone preamp gain is that you can keep the mic pre close to the source (so the analogue cable run is minimal) while still setting gain from the control room.

big
Eight high-quality Focusrite remote-controlled mic preamps and A-D for Dante audio-over-IP networks
DC-coupled signal path for characteristically open and transparent sound
24-bit precision conversion up to 192kHz
119dB dynamic range
AES67 compliant; may require hardware update. Please contact us for further information
Remote-controllable Gain, Phantom Power and High-Pass Filter from Yamaha CL and QL Series Consoles
Line inputs wired to AES59 standard on DB25 connector
Comprehensive front-panel metering and indicators
Remote monitoring software with powerful graphic user interface

specifications

Microphone Inputs


Phantom power

48 V, independently switchable per-channel

Type

Electronically balanced, Zin = 2.4 kohms

Max. input level

24 ±0.5 dB; min. gain for 0 dBFS

Min. input level

-30 ±0.5 dB; max. gain for 0 dBFS

Frequency response

20 Hz – 55 kHz ±0.1 dB (-3 dB @ 80 kHz, fs = 192 kHz); Rs = 150 ohms

THD N Inputs

? 0.003 @ -1 dBFS; 23 dBu input, min.gain, 20 Hz – 22 kHz

Noise

EIN -128 dB; 60 dB gain, Rs = 150 ohms, 20 Hz – 22 kHz

Signal-to-noise ratio

119 dB ‘A’-weighted; Rs = 150 ohms

Gain range

0 dB; 8 to 63 dB in 1 dB steps

Line Inputs


Gain range inputs

-12 to 42 dB in 1 dB steps

Frequency response inputs

20 Hz – 20 kHz ±0.1 dB

Signal-to-noise ratio inputs

117 dB ‘A’-weighted

Analogue High-Pass Filters


Selection

Independently switchable per-channel

Frequency/slope

-6 dB @ 65 ±3 Hz, 12 dB/octave

Crosstalk


Input to input

?-80 dB (all other channels at 0 dBFS)

Digital Performance


Supported sample rates

44.1 / 48 / 88.2 / 96 / 192 kHz

Clock sources

Internal or from network master device

Power


PSU

Internal, Universal type, consumption 30 VA

Front Panel Indicators


Power

Green

Network connected

Green

Sync lock

Green

Sample rate

Yellow x 5

Channel 1/2 source

Yellow x 3 (mic/line/inst)

Signal level

Green x 8 (-42 dBFS); Yellow x 8 (-6 dBFS); Red x 8 (overload)

Channel select buttons

8

Channel function controls

Input source, HPF, phantom power, Gain encoder

Channel display

Colour OLED; channel number, input source, gain

Downloads

User Guide


RedNet 4 User Guide 1.0 - English

RedNet 4 User Guide 1.0 - Chinese

RedNet Control 2 User Guides - English

RedNet Getting Started Guide - English

RedNet Getting Started Guide - Chinese

RedNet Getting Started Guide - French

RedNet Getting Started Guide - Germany

RedNet Getting Started Guide - Japanese

RedNet Getting Started Guide - Korean

RedNet Getting Started Guide - Spanish

RedNet Installation Guide 1.1

RedNet MIDI Control Guide

RedNet System User Guide 1.0

Data Sheet


RedNet 4 Architect Spec

RedNet Control 2.0 Feature Sheet

Mac RedNet Control 2.1

New Features in RedNet Control 2.1

Click here for full release notes

Windows RedNet Control 2.1

New Features in RedNet Control

Click here for full release notes

Firmware


RedNet 3.4 to 3.7 Firmware Update - Rednet 1-5 Only

Rednet 1-5 Brooklyn 1 devices only

For use before installation of Rednet Control 1.8.2 & 1.9.2.

Click here for full release notes

Contact Us

If you would like more information on how our audio solutions could add to your audio workflow, or to request a demonstration, please contact us to have one of our specialists get in touch.

Contact Us