16x16 analogue I/O with dual PSUs

RedNet A16R is a 1U, 16x16 analogue line-level I/O interface for any Dante™ audio-over-IP network. Featuring network and power supply redundancy, RedNet A16R is the ideal choice for providing analogue I/O in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio.

High-quality conversion with up to 119dB of dynamic range is provided through four rear-panel DB25 connectors while an additional pair of AES3 I/O is provided through male and female XLR for added flexibility. Word Clock I/O on BNC connectors allows external devices to clock to RedNet A16R, or alternatively allows A16R to act as a network clock grand master slaved to external input. Power is supplied through a pair of locking IEC power inlets, and network connections are provided with a pair of locking Neutrik etherCON connectors; providing redundant operation or daisy-chained operation.

big
16 channels of high-quality line-level analogue I/O for Dante audio-over-IP networks
24-bit precision conversion up to 192kHz
119dB dynamic range, flat from 20Hz – 20kHz, +/-0.15dB
Software-selectable +24dBu or +18dBu level alignment
AES67 compliant
Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability
Word Clock I/O and DARS input for increased flexibility plus an additional two channels of AES3 I/O
Analogue I/O to AES59 standard on DB25 connectors
Comprehensive front-panel metering and indicators
Remote monitoring software with powerful graphic user interface

specifications

Line Inputs


0 dBFS Reference Levels

+18 or 24dBu (switchable)

Frequency Response

20Hz – 20kHz ± 0.1dB

THD N

<-100dB (0.001) unweighted, 20Hz – 20kHz; -1dBFS input

EIN

-96dBu A-Weighted (typical)

Signal-to-Noise Ratio

120dB A-Weighted (typical)

Converter Dynamic Range

120dB A-Weighted (typical), 10Hz – 20kHz

Line Outputs


0 dBFS Reference Levels outputs

18 or 24dBu (switchable)

Frequency Response Outputs

20Hz – 20kHz ± 0.1dB

THD N Outputs

<-100dB (0.001) unweighted, 20Hz – 20kHz; 23dBu input

Noise in Presence of Signal

-94dBu A-Weighted (typical)

Dynamic Range

118 dB A-Weighted (typical)

Converter Dynamic Range Output

120dB A-Weighted (typical), 10Hz – 20kHz

Crosstalk


Input to Output or Input

<-100dB unweighted, 20Hz – 20kHz; 23dBu input

Output to Input or Output

<-100dB unweighted, 20Hz – 20kHz; -1dBFS input

Digital Input Sample Rate Converters


Sample Rate Range

32kHz to 216kHz

Gain Error

-0.3dB

Dynamic Range Inputs

>138dB

THD N Inputs

<-130dB (0.00003)

Latency

11 to 45 samples (network and sample rate dependent)

Digital Performance


Supported Sample Rates

44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit

Clock Sources

Internal or from Dante Network Master

External Word Clock Range

Nominal sample rate ±7.5

Rear Panel Connectivity


Line Inputs

2 x DB-25 connectors

Line Outputs

2 x DB-25 connectors

Channel Count

2 x 2 AES/EBU channels

Input (optional DARS)

1 x Female XLR (Switchable with analogue input channels 15 and 16 at quad rates)

Output

1 x Male XLR (Duplicate of analogue output channels 15 and 16 at quad rates)

Word Clock Input

1 x BNC 75O port (switchable termination)

Word Clock Output

1 x BNC 75O port

PSU

2 x IEC Inputs with retaining clips.

Network

2 x etherCON NE8FBH, also compatible with standard RJ45 connectors

Front Panel Indicators


Primary PSU (A)

Green LED. Illuminates when an AC input is applied and all DC outputs are present

Secondary PSU (B)

Green LED. Illuminates when an AC input is applied and all DC outputs are present

Primary Network

Green LED. Indicates that a network connection is present on primary port when in redundant mode

Secondary Network

Green LED. Indicates that a network connection is present on secondary port when in redundant mode

Network Locked

Green LED. When unit is network slave, shows valid network lock

Sample Rate

Orange LED for each: 44.1 kHz, 48 kHz, x2, x4

Pull Up/Down

Orange LED. Indicates that the unit is set to operate on a Dante pull up/down domain

AES/EBU signal indicators

2 I/O signal indicator LEDs

Clock Source

Orange LED for each

Network Modes


Redundant

Allows unit to connect to two independent networks

Switched

Connects both ports to integrated network switch allowing daisy-chaining

Downloads

User Guide


RedNet A8R and A16R User Manual - English

RedNet A8R and A16R User Manual - French

RedNet Control 2 User Guides - English

RedNet Getting Started Guide - English

RedNet Getting Started Guide - Chinese

RedNet Getting Started Guide - French

RedNet Getting Started Guide - Germany

RedNet Getting Started Guide - Japanese

RedNet Getting Started Guide - Korean

RedNet Getting Started Guide - Spanish

RedNet Installation Guide 1.1

RedNet System User Guide 1.0

Data Sheet


RedNet A16R Architect Specs

RedNet A16R Data Sheet

RedNet Control 2.0 Feature Sheet

Mac RedNet Control 2.1

New Features in RedNet Control 2.1

Click here for full release notes

Windows RedNet Control 2.1

New Features in RedNet Control

Click here for full release notes

Contact Us

If you would like more information on how our audio solutions could add to your audio workflow, or to request a demonstration, please contact us to have one of our specialists get in touch.

Contact Us