Stereo headphone and line output, PoE supplied

RedNet AM2 is a compact, Power-over-Ethernet (PoE) -supplied stereo analogue output device for any Dante audio-over-IP network. Featuring a powerful headphone amp, capable of driving both high and low impedance headphones, RedNet AM2 is the ideal signal monitoring device to add extra functionality to your audio network.

A pair of rear-panel XLR outputs offers line level signals of up to 24dBu with top panel level control and mute switch, while the front panel 1/4" headphone output is capable of driving high signal levels perfect for monitoring in high-SPL environments. The bottom of the sturdy aluminium and steel chassis features a threaded mic stand boss allowing RedNet AM2 to be placed in any convenient location whether on a desk or at a performer's fingertips on a stand. Finally, the IEEE standard PoE input allows a single Ethernet cable to provide power, remote control, clocking and audio data to RedNet AM2.

big
Stereo line output and headphone for Dante audio-over-IP networks
Power-over-Ethernet supplied: IEEE 802.3af compliant
Up to 24-bit, 96kHz sampling rates
Robust steel and aluminium chassis
Powerful headphone output even with high-impedance headphones
Up to 24dBu line output levels
Independent level control of headphone and line outputs
Mute switch for line output
Mic stand mount
Kensington security slot
Integrated network switch allowing daisy-chaining of network devices

specifications

Line Level Outputs


0 dBFS Reference Output Levels

18 or 24dBu (switchable)

Frequency Response Output

20Hz - 20kHz ±0.05dB

THD N Output

<-100dB (0.001) unweighted, 20Hz - 20kHz; -1dBFS input

Dynamic Range

120dB A-weighted (typical), 20Hz - 20kHz

Crosstalk


Output to Output

<-100dB unweighted, 20Hz - 20kHz; -20dBFS input

Headphone Output


0 dBFS Reference Levels Headphones

19dBm

Headphone Frequency Response

20Hz - 20kHz ±0.05dB

Headphone THD N

<-100dB (0.001) unweighted, 20Hz - 20kHz; -1dBFS input

Headphone Dynamic Range

118dB A-weighted (typical), 20Hz - 20kHz

Output Impedance

5O

Headphone Impedance

32O - 600O

Digital Performance


Supported Sample Rates

44.1 / 48 / 88.2 / 96 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit

Clock Sources

Internal or from Dante Network Master

Minimum Latency

1ms

Front Panel Connectivity


Headphone Outputs

1 x 1/4" stereo jack

Line Outputs

2 x Male XLR

PSU (PoE and DC)

1 x PoE (Port 1) Input and 1 x DC 12V Barrel Input Connector

Network

Green LED: Indicates device is network master or network slave, shows valid network lock

Rear Panel Connectivity


Top Panel Indicators


Power

LED illuminates Green when PoE is connected and Red when DC power is connected

Signal

Signal indicator LED for both network input channels

Mute

Red LED

Control Functions

2 x Pots

Dimensions


Height (Chassis Only)

48mm/ 1.89"

Height (inc. Pots and Feet)

58mm/ 2.28"

Width

140mm/ 5.51"

Depth (Chassis Only)

106.5mm/ 4.19"

Depth (inc. Connectors)

116mm/ 4.57"

Weight


Weight

0.81kg

Power


Power over Ethernet (PoE)

Complies with IEEE 802.3af class 0 Power-over-Ethernet standard

DC Power Supply

1 x 12V 1.2A DC Power Supply

Power Consumption

PoE: 11.0W - DC: 9.8W

Operating Temperature

Operates at up to an ambient temperature of 50 degrees Celcius

Heat Performance


Downloads

user guides


RedNet AM2 User Guides - English

User Guide


RedNet AM2 User Guides - English

RedNet AM2 User Guides - French

RedNet AM2 User Guides - Chinese

RedNet Control 2 User Guides - English

RedNet Getting Started Guide - English

RedNet Getting Started Guide - Chinese

RedNet Getting Started Guide - French

RedNet Getting Started Guide - Japanese

RedNet Getting Started Guide - Germany

RedNet Getting Started Guide - Korean

RedNet Getting Started Guide - Spanish

RedNet Installation Guide 1.1

RedNet System User Guide 1.0

Data Sheet


RedNet AM2 Architect Spec

RedNet AM2 Data Sheet

Testing, Testing!

RedNet Control 2.0 Feature Sheet

Mac RedNet Control 2.1

New Features in RedNet Control 2.1

Click here for full release notes

Windows RedNet Control 2.1

New Features in RedNet Control

Click here for full release notes

Contact Us

If you would like more information on how our audio solutions could add to your audio workflow, or to request a demonstration, please contact us to have one of our specialists get in touch.

Contact Us