16x16 AES3 I/O with dual PSUs

RedNet D16R is a 1U, 16x16 AES3 interface for any Dante™ audio-over-IP network. Featuring network and power supply redundancy, RedNet D16R is the ideal choice for providing AES3 I/O in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio. Perfect for bridging between digital consoles, power amplifiers or any other AES3-equipped audio equipment and any Dante network, RedNet D16R has SRC (Sample Rate Conversion) on each input pair allowing plug-and-play operation with any AES3 source.

Four rear-panel DB25 connectors wired to the AES59 standard provide eight pairs of AES3 I/O, while an additional pair of XLR connectors allows flexibility in cabling choice for one pair of I/O. Additional RCA connectors allow the connection of consumer S/PDIF equipment. All external audio inputs include sample rate conversion, further reducing cabling and clocking complexity. Word Clock I/O on BNC connectors allows external devices to clock to RedNet D16R, or alternatively allows RedNet D16R to act as a network clock grand master slaved to external input. Power is supplied through a pair of locking IEC power inlets, and network connections are provided with a pair of locking Neutrik etherCON connectors; providing redundant operation or daisy-chained operation.

big
16x16 AES3 I/O for Dante audio-over-IP networks
Up to 24-bit, 192kHz sampling rates with sample rate conversion
AES67 compliant
Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability
Flexible input options: DB25, XLR, RCA
Word Clock I/O and DARS input for increased flexibility
Combined digital I/O to AES59 standard on DB25 connectors
Comprehensive front-panel metering and indicators
Remote monitoring software with powerful graphic user interface

specifications

Input Sample Rate Convertors


Sample Rate Range

32 to 216 kHz

Gain Error

-0.3dB

Dynamic Range

> 138dB (-60 dBFS method)

THD N

< -130dB (0.00003); 0 dBFS input

Latency

11 to 45 samples (network and input sample rate dependent).

Digital Performance


Supported Sample Rates

44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit

Clock Sources

Internal, Word Clock, DARS, AES input 1-2, AES input 9-10 or from Dante Network Master

Rear Panel Connectivity


Channel Count

2 x 2 S/PDIF Channels (reduces AES/EBU input channels)

Input and Output

2 x DB-25 connectors (AES59 Combined I/O / Tascam Digital)

Alternate Input (optional DARS)

1 x Female XLR (replaces DB-25 channels 1-2)

Alternate Output

1 x Male XLR (duplicates DB-25 channels 1-2)

Input

1 x RCA phono socket (replaces DB-25 channels 3-4)

Output

1 x RCA phono socket (switchable, duplicates any DB-25 channel pair)

PSU

2 x IEC Inputs with retaining clips

Network

2 x etherCON NE8FBH-S, also compatible with standard RJ45 connectors

AES/EBU Channel Count

16 x 16 AES/EBU channels

Front Panel Indicators


Primary PSU (A)

Green LED. Illuminates when an AC input is applied and all DC outputs are present.

Secondary PSU (B)

Green LED. Illuminates when an AC input is applied and all DC outputs are present.

Sample Rate

Orange LED for each: 44.1 kHz, 48 kHz, x2, x4.

Pull Up/Down

Orange LED. Indicates unit is set to operate on a Dante pull up/down domain.

Signal Indicators

16 Green LEDs, 8 input/8 output indicators. Illuminate @ -126dBFS.

Secondary Network

Green LED. Indicates that a network connection is present on secondary port when in redundant mode

Network Locked

Green LED. When unit is network slave, shows valid network lock

Clock Source

Orange LED for each: Internal, Word Clock, DARS, Input 1–2 and Input 9–10

Network Modes


Redundant

Allows unit to connect to two independent networks

Switched

Connects both ports to integrated network switch allowing daisy-chaining

Dimensions


Height

44.5mm/ 1.75"

Width

482.6mm/ 19"

Depth

263mm/ 10.35"

Weight


Weight

3.84kg

Power


Power PSU

2 x Internal, 100-240V, 50/60Hz, consumption 30VA

Heat Performance


Operating Temperature

Operates at up to an ambient temperature of 50 degrees Celcius

Downloads

User Guide


RedNet Control 2 User Guides - English

RedNet D16/D16R User Manual - English

RedNet D16/D16R User Manual - French

RedNet D16/D16R User Manual - Chinese

RedNet Getting Started Guide - English

RedNet Getting Started Guide - Chinese

RedNet Getting Started Guide - French

RedNet Getting Started Guide - Germany

RedNet Getting Started Guide - Japanese

RedNet Getting Started Guide - Korean

RedNet Getting Started Guide - Spanish

RedNet Installation Guide 1.1

RedNet System User Guide 1.0

Data Sheet


RedNet Control 2.0 Feature Sheet

Mac RedNet Control 2.1

New Features in RedNet Control 2.1

Click here for full release notes

Windows RedNet Control 2.1

New Features in RedNet Control

Click here for full release notes

RedNet D16R Architect Spec

RedNet D16R Data Sheet

Contact Us

If you would like more information on how our audio solutions could add to your audio workflow, or to request a demonstration, please contact us to have one of our specialists get in touch.

Contact Us