Focusrite ISA ADN8

ISA ADN8

Trustpilot

Add to wishlist

Eight-channel A-D card for ISA 428 MkII and ISA 828 MkII, including Dante connectivity

$799.99
Adding to basket… The item has been added
Find a dealer

Description

With the introduction of the ISA ADN8, the classic ISA mic pre can be implemented directly on a Dante network, providing console-grade preamps to the most advanced of audio networks. ISA ADN8 is an optional eight-channel A-D card that provides high-quality, precision analogue-to-digital conversion for the Focusrite ISA 428 MK2 and ISA 828 MK2 microphone preamps. Featuring Dante, AES3 and ADAT connectivity, the card operates at sample rates up to 24-bit/192kHz.

The card offers a familiar set of standard professional connectors with primary and secondary RJ45 Dante output ports, an AES59 DB25 connector for AES3 output, and a pair of TOSLINK connectors for ADAT output. Word Clock I/O on BNC connectors allows synchronisation with many external devices.

Dante outputs on the ISA ADN8 provide ISA 428 MK2 and ISA 828 MK2 with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-enabled device from hundreds of manufacturers. Metering and settings are accessed through RedNet Control, routing is configured using Dante Controller. Both RedNet Control and Dante Controller software are included.

Key Features

  • Eight-channels of high-quality, precision analogue to digital converter for ISA 428 MK2 and ISA 828 MK2
  • Up to 24-bit/192kHz sample rate
  • Dante connectivity via Primary and Secondary Ethernet ports for redundancy and auto switchover in case of failure
  • Industry standard eight-channel AES59 DB25 output connection for AES3
  • Two TOSLINK connectors for ADAT (8 channels at up to 96kHz; 4 channels at 192kHz)
  • Word Clock I/O on BNC connectors allows synchronisation with many external devices
  • RedNet Control and Dante Controller software allow Dante routing and control from a computer; no hardware patching required

Eight-channel A-D card for ISA 428 MKII and ISA 828 MKII, including Dante connectivity

ISA ADN8 is an optional eight-channel A-D card that provides high-quality analogue-to-digital conversion for the Focusrite ISA 428 MkII and ISA 828 MkII microphone preamps. Featuring Dante, AES3 and ADAT connectivity, the card operates at sample rates up to 24-bit / 192kHz.

The card offers primary and secondary RJ45 Dante output ports, an AES59 DB25 connector for AES3 output, and a pair of TOSLINK connectors for ADAT output. Word Clock I/O on BNC connectors allows synchronisation to multiple digital sources. This also includes syncing the Dante network to house clock, or for syncing external equipment to the Dante network.

Dante outputs on the ISA ADN8 provide ISA 428 MkII and ISA 828 MkII with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-enabled device from hundreds of manufacturers. Metering and settings are accessed through RedNet Control, routing is configured using Dante Controller.

And as with all Focusrite Pro products, wherever you happen to be in the world, you can rely on a three-year warranty if any Focusrite Pro hardware needs repairing or replacing due to a manufacturing fault.

Brainworx bx_console

Brainworx bx_console

The Focusrite Studio Console reborn in your DAW

The Focusrite Studio Console defined countless hits of the 80s and 90s, thanks in large part to its ISA 110 Equaliser and ISA 130 Dynamics Modules. Brainworx's bx_console Focusrite plug-in brings you stunningly accurate emulations of both in a single plug-in, perfectly capturing the famously warm, open sound of two of the most revered pieces of studio hardware ever made.
3 year warranty

Enjoy 3 years of warranty

All Focusrite products are built to the highest standards, and are designed to provide many years of reliable performance.

Audio performance
  • 0 DBFS Reference Levels22dBu
  • Frequency Response20Hz - 20kHz ±0.1dB
  • THD+N-105dB (0.0006%) unweighted, 20Hz - 20kHz; -1dBFS input
  • Noise In Presence Of Signal-121dBu 'A'-Weighted (typical)
  • Dynamic Range121dB 'A'-weighted (typical), 20Hz - 20kHz
Digital performance
  • Supported Sample Rates44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
  • Clock SourcesInternal or Word Clock
Dante
  • Channel Count8 x ADAT channels
  • Output2 x TOSLINK connectors
AES3
  • Channel Count8 x AES3 channels
  • Output1 x DB-25 connectors (AES59 Combined I/O / Tascam Digital)
ADAT
  • Channel Assignments @ 44.1 KHz, 48 KHzPort 1 = Channels 1 - 8 , Port 2 = Channels 1 - 8
  • Channel Assignments @ 88.2 KHz, 96 KHzSMUXI: Port 1 = Channels 1 - 4, Port 2 = Channels 5 - 8
  • Channel Assignments @ 176.4 KHz, 192 KHzSMUXII: Port 1 = Channels 1 - 2 , Port 2 = Channels 3 - 4
  • Channel Count8 x ADAT channels
  • Output2 x TOSLINK connectors
World clock
  • Word Clock Input1 x BNC 75O port (Switchable Termination)
  • Word Clock Output1 x BNC 75O port
Trustpilot

Need help with your ISA ADN8?

Book consultation Visit help centre Downloads and manuals
!
content