32x32 Pro Tools | HD I/O with dual PSUs

RedNet HD32R is a 1U, Pro Tools | HD interface for any Dante audio-over-IP network, providing up to 32x32 channels of I/O (16x16 at 192kHz) Featuring network and power supply redundancy, RedNet HD32R is the ideal choice for integrating your Pro Tools HD system into a Dante networked I/O environment in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio.

A pair of DigiLink mini connectors allows RedNet HD32R to connect directly to any Pro Tools | HD system whether it's Native, HDX or even a legacy TDM system. Multiple RedNet HD32R units can be on the same Pro Tools system up to the maximum I/O channel count of Pro Tools, and Loop Sync I/O allows seamless integration with other Pro Tools interfaces such as HD I/O and Sync HD I/O.

32x32 Pro Tools | HD I/O for Dante audio-over-IP networks at up to 96kHz (16x16 at 192kHz)
Primary and Expansion DigiLink mini connections
Up to 24-bit, 192kHz sampling rates
AES67 compliant
Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability
Word Clock and Loop Sync I/O for increased flexibility and integration with other Pro Tools | HD hardware
Comprehensive remote control and remote signal metering through RedNet Control
Brainworx bx_console Focusrite – exclusive plug-in that faithfully captures the sound, feel and styling of the original Focusrite ISA 110 Equaliser and ISA 130 Dynamics Modules.


Digital Performance

Supported Sample Rates

44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit

Clock Sources

Internal, Word Clock, Loop Sync (master or slave) or from Dante Network Master

External Word Clock Range

Nominal sample rate ±7.5

Channel Count

32x32 at up to 96kHz sampling rate, 16x16 at 176.4 and 192kHz

Rear Panel Connectivity

Primary Port

1 x Mini DigiLink

Expansion Port

1 x Mini DigiLink

Word Clock Input

1 x BNC 75O port (switchable termination)

Word Clock Output

1 x BNC 75O port


2 x IEC Inputs with retaining clips


2 x etherCON NE8FBH-S, also compatible with standard RJ45 connectors

Front Panel Indicators

Primary PSU (A)

Green LED. Illuminates when an AC input is applied and all DC outputs are present

Primary PSU (B)

Green LED. Illuminates when an AC input is applied and all DC outputs are present

Primary Network

Green LED. Indicates that a network connection is present on primary port when in redundant mode

Secondary Network

Green LED. Indicates that a network connection is present on secondary port when in redundant mode

Network Locked

Green LED. When unit is network slave, shows valid network lock. When unit is network master

Sample Rate

Orange LED for each: 44.1 kHz, 48 kHz, x2, x4

Pull Up/Down

Orange LED. Indicates unit is set to operate on a Dante pull up/down domain

Signal Indicators

16 Green LEDs, 8 input/8 output indicators. Illuminate @ -126dBFS

Clock Source

Orange LED for each: Internal, Word Clock, Loop Sync and DAW Master

Network Modes


Allows unit to connect two independent networks


Connects both ports to integrated network switch allowing daisy-chaining of device



44.5mm/ 1.75"


482.6mm/ 19"


263mm/ 10.35"





Power PSU

2 x Internal, 100-240V, 50/60Hz, consumption 30VA

Heat Performance

Operating Temperature

Operates at up to an ambient temperature of 50 degrees Celcius


User Guide

RedNet Getting Started Guide - English

RedNet Getting Started Guide - Chinese

RedNet Getting Started Guide - French

RedNet Getting Started Guide - Germany

RedNet Getting Started Guide - Japanese

RedNet Getting Started Guide - Korean

RedNet Getting Started Guide - Spanish

RedNet Installation Guide 1.1

RedNet System User Guide 1.0

RedNet 5/HD32R User Guide - English

RedNet 5/HD32R User Guide - French

RedNet 5/HD32R User Guide - Chinese

RedNet Control 2.4 User Guide

Data Sheet

RedNet HD32R Architect Spec

RedNet HD32R Data Sheet


RedNet Control 2.8.5 for Mac

RedNet Control 2.8.5 for Windows

RedNet Control 2.8.5 Release Notes

Contact Us

If you would like more information on how our audio solutions could add to your audio workflow, or to request a demonstration, please contact us to have one of our specialists get in touch.

Contact Us