2x2 analogue I/O with 2x mic pres, headphone and line output, PoE supplied

RedNet X2P is a compact, portable and robust 2x2 Dante™ audio interface featuring two Red Evolution mic pres, stereo line out and a stereo headphone amplifier. RedNet X2P allows you to effortless add a high quality Dante audio interface by integrating power, audio, clock and remote control over a single Ethernet cable – simply use a power over Ethernet switch or PoE injector. A local input mixer allows 'more me' monitoring control, while a control lockout mode ensures settings can not be changed when used remotely.

Rear panel XLR outputs offer level-controlled analogue outputs of up to 24dBu, while a front panel 1/4" connector provides a high-powered headphone output capable of driving both high and low impedance headphones. A pair of combination XLR/1/4" inputs allow the connection of mic, line or instrument level signals to the mic pres, which include Focusrite's acclaimed Air mode which emulates the sound of our classic input transformers. The top panel features an array of controls: output level for headphone and line outputs, mic pre controls of gain, high-pass filter, Air, phase invert, phantom power and stereo linking; as well as the crossfader for controlling the balance of mic pre inputs and network receiver channels which to be sent to the headphone or line outputs.

2_Year_Warranty_blk.jpg

big
Stereo 2x2 audio interface for Dante Audio-over-IP networks
Two Red Evolution mic preamps for mic, line or instrument level inputs
Power-over-Ethernet supplied: IEEE 802.3af compliant
Up to 24-bit, 96kHz sampling rates
Robust steel and aluminium chassis
Local input mix to allow ‘more-me’ style monitoring for easy foldback control
Powerful headphone output even with high-impedance headphones
Local control lockout of mic pre settings, output settings or both
Up to 24dBu line output levels
Independent level control of headphone and line outputs
Mute switch for line output
Mic stand mount
Kensington security slot
Integrated network switch allowing daisy-chaining of network devices

specifications

Microphone/ Line Inputs


Gain Range

0dB to 68dB in 1dB steps

Type

Electronically Balanced, Zin = 6.2kO

Max. Input Level

>+24dBu, min gain

Frequency Response

20Hz - 35kHz ±0.1dB

THD + N

-103dB (0.0007%) @ -1dBFS (@ 24dB Gain)

EIN

<-130dBu 'A'-Weighted (typical)

Signal-to-Noise Ratio

-120dB 'A'-Weighted (typical), min gain

Common-Mode Rejection Ratio

50/60Hz CMRR: -80dB

Phantom Power

+48V, independently switchable per channel.

HPF

High-Pass Filter (HPF): -3dB @ 80 ± 3Hz, 12dB/Octave, independently switchable per channel

Air Mode

2dB boost at 10kHz and -2dB at 20Hz (ref 1kHz). Input impedance drop to 2.2kO

Instrument Inputs


Instrument Inputs Gain Range

0dB to 68dB in 1dB steps

Instrument Inputs Type

Electronically Balanced, Zin = 2MO

Instrument Inputs Max. Input Level

>+15dBu, min gain

Instrument Inputs Frequency Response

20Hz - 35kHz ±0.1dB

Instrument Inputs THD + N

<-100dB (0.001%) @ -1dBFS (@ 16dB Gain)

Instrument Inputs Signal-to-Noise Ratio

-118dB 'A'-Weighted (typical), min gain

Instrument Inputs HPF

High-Pass Filter (HPF): -3dB @ 80 ± 3Hz, 12dB/Octave, independently switchable per channel

Line Level Outputs


Line Level Outputs 0 dBFS Reference Levels

+18 or +24dBu (switchable)

Line Level Outputs Frequency Response

20Hz - 35kHz ±0.1dB

Line Level Outputs THD + N

<-104dB (0.0006%) @ -1dBFS

Line Level Outputs Dynamic Range

-120dB 'A'-Weighted (typical), 20Hz - 20kHz

Headphone Output


Headphone Output 0 dBFS Reference Levels

>+19dBm

Headphone Output Frequency Response

20Hz - 20kHz ±0.2dB

Headphone Output THD + N

<-103dB (0.0007%) @ -1dBFS

Headphone Output Dynamic Range

117dB 'A'-weighted (typical), 20Hz - 20kHz

Headphone Output Impedance

5O

Headphone Impedance

32O - 600O

Microphone/ Line Crosstalk


Mic/Line Input to Input

< -72dB; 20Hz - 20kHz (driven channel at -20dBFS)

Mic/Line Input to Output

< -126dB; 20Hz - 20kHz (driven channel at -20dBFS)

Output to Mic/Line Input

< -159dB; 20Hz - 20kHz (driven channel at -20dBFS)

Output Crosstalk


Output to Output

< -101dB; 20Hz - 20kHz (driven channel at -20dBFS)

Headphone Crosstalk


Right to Left

< -85dB; 20Hz - 20kHz (driven channel at -20dBFS)

Digital Performance


Supported Sample Rates

44.1 / 48 / 88.2 / 96 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit

Clock Sources

Internal or from Dante Network Master.

Front Panel Connectivity


Outputs Headphone Outputs

1 x 1/4" stereo jack

Rear Panel Connectivity


Inputs Mic/Line/Inst Inputs

2 x Locking Combi XLR

Outputs Line Outputs

2 x Male XLR

PSU & Network Connections


PSU (PoE and DC)

1 x PoE (Port 1) Input and 1 x DC 12V Locking Barrel Input Connector.

Network

2 x etherCON connectors, also compatible with standard RJ45 connectors.

Top Panel Indicators


LCD Screen

1 x Screen (Status & Metering)

Dimensions


Height (Chassis Only)

47.5mm/ 1.87"

Width

140mm/ 5.51"

Depth (Chassis Only)

104mm/ 4.09"

Weight


Weight

1.04kg

Power


Power over Ethernet (PoE)

Complies with IEEE 802.3af class 0 Power-over-Ethernet standard (PoE A or PoE B compatible)

DC Power Supply

1 x 12V 1.2A DC Power Supply.

Power Consumption

PoE: 11.0W - DC: 13.32W (When using supplied DC PSU)

Heat Performance


Operating Temperature

Operates at up to an ambient temperature of 45 degrees Celcius

Downloads

User Guide


RedNet X2P User Guide GB

RedNet X2P User Guide Chinese

RedNet X2P User Guide French

RedNet X2P User Guide German

REdNet X2P User Guide Japanese

RedNet X2P User Guide Spanish

RedNet MIDI Controller Manual

RedNet Control 2 User Manual | English

Software


RedNet Control 2.2.1 | Mac

RedNet Control 2.2.1 | Windows

Contact Us

If you would like more information on how our audio solutions could add to your audio workflow, or to request a demonstration, please contact us to have one of our specialists get in touch.

Contact Us