0 dBFS Reference Levels
22dBu
Two-channel A-D card for ISA One, including Dante connectivity
ISA ADN2 is an optional two-channel A-D card that provides high-quality analogue-to-digital conversion for the ISA One mic preamp and DI. Featuring Dante, AES3, ADAT andS/PDIF connectivity, the card operates at sample rates up to 24-bit/192kHz.
The card offers primary and secondary RJ45 Dante output ports, an XLR connector for AES3 output, a TOSLINK connector for ADAT output and RCA connector for S/PDIFoutput. Word Clock I/O on BNC connectors allows synchronisation to multiple digital sources. This also includes syncing the Dante network to house clock,or for syncing external equipment to the Dante network.
Dante outputs on the card provide ISA One with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-enabled device from hundreds of manufacturers. Metering and settings are accessed through RedNet Control, routing is configured using Dante Controller.
And as with all Focusrite Pro products, wherever you happen to be in the world, you can rely on a three-year warranty if any Focusrite Pro hardware needs repairing or replacing due to a manufacturing fault.
0 dBFS Reference Levels
22dBu
Frequency Response
20Hz - 20kHz ±0.1dB
THD+N
-105dB (0.0006%) unweighted, 20Hz - 20kHz; -1dBFS input
Noise in Presence of Signal
-121dBu 'A'-Weighted (typical)
Dynamic Range
121dB 'A'-weighted (typical), 20Hz - 20kHz
Supported Sample Rates
44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
Clock Sources
Internal or Word Clock
Input to Input
< -100dB; 20Hz - 20kHz (driven channel at -20dBFS)
Channel Count
2 x Dante channels
Output
1 x Male XLR
Output
2 x Ethernet standard RJ45 connectors (Compatible with Cat 5e and above).
Channel Count
2 x Dante channels
Channel Count
2 x Dante channels
Output
1 x Male XLR
Channel count
2 x ADAT channels
Output
1 x TOSLINK connectors
Channel Assignments @ 44.1 kHz, 48 kHz
Port 1 = Channels 1 - 2
Channel Assignments @ 88.2 kHz, 96 kHz: SMUXI
Port 1 = Channels 1 - 2
Channel Assignments @ 176.4 kHz, 192 kHz: SMUXII
Port 1 = Channels 1 - 2
Channel Count
2 x S/PDIF channels
Output
1 x RCA phono socket
Word Clock Input
1 x BNC 75Ω port (Switchable Termination)
Word Clock Output
1 x BNC 75Ω port
