Power
Green
RedNet 2 connects to your Dante™ audio-over-IP network with a single Ethernet cable. It's remotely controlled via the network and can be placed anywhere in your facility. It offers 16 channels of line-level analogue in and out, with Focusrite's precision 24-bit A-D and D-A conversion for superb audio performance, and 119dB dynamic range at sample rates up to 192kHz. The rear panel includes AES59 standard DB25 connectors for analogue patchbay or breakout cable interfacing.
Power
Green
Network connected
Green
Sync Lock
Green
Sample rate
Yellow x 5
Input/Output range
Yellow x 2
Input/Output signal level
Bi-colour x 32 (Green = -42 dBFS; Orange = -6 dBFS; Red = overload)
Input or Output to Input
< -90 dB (all other channels at 0 dBFS)
Input or Output to Output
< -100 dB (all other channels at 0 dBFS)
Supported sample rates
44.1 / 48 / 88.2 / 96 / 192 kHz
Clock sources
Internal or from network master device
PSU
Internal, Universal type, consumption 30 VA
Analogue line outputs
16
Connector Outputs
25-way female Dsub x 2, wired to AES 59
0 dBFS reference output levels
18 or 24 dBu (switchable)
Frequency response outputs
20 Hz – 20 kHz ±0.15 dB
THD N Outputs
< 0.001 unweighted; -1 dBFS input, 20 Hz – 22 kHz
Dynamic Range Outputs
119 dB ‘A’-weighted (-60 dBFS method)
Converter dynamic range outputs
120 dB
Signal-to-noise ratio outputs
119 dB ‘A’-weighted; 20 Hz – 20 kHz
Analogue line inputs
16
Connector
25-way female Dsub x 2, wired to AES 59
Converter dynamic range
120 dB
0 dBFS reference levels
18 or 24 dBu (switchable)
Frequency response
20 Hz – 20 kHz ±0.05 dB
THD N Inputs
< 0.001 unweighted; -1 dBFS input, 20 Hz – 22 kHz
Dynamic Range Inputs
119 dB ‘A’-weighted (-60 dBFS method)
Signal-to-noise ratio
119 dB ‘A’-weighted; 20 Hz – 20 kHz
RedNet 3.4 to 3.7 Firmware Update - Rednet 1-5 Only
Rednet 1-5 Brooklyn 1 devices only
For use before installation of Rednet Control 1.8.2 & 1.9.2.
If you would like more information on how our audio solutions could add to your audio workflow, or to request a demonstration, please contact us to have one of our specialists get in touch.
Contact Us