AES/EBU inputs
8 channels, with switchable SRC
RedNet 3 interfaces your existing digital audio systems and components to any Dante™ audio-over-IP network, with up to 32 inputs and outputs and full software remote control. The unit includes support for AES3, S/PDIF and ADAT digital audio formats and allows the network to be synchronised to incoming signal clock or a word clock source.
AES/EBU inputs
8 channels, with switchable SRC
AES/EBU connector
25-way female Dsub, wired to AES 59 (combined I/O)
ADAT inputs
32 channels @ 44.1 / 48 / 88.2 / 96 kHz sample rate; 16 channels @ 192 kHz
ADAT connectors
TOSLINK lightguides x 8
S/PDIF input
2 channels, with switchable SRC 44.1 to 192 kHz
S/PDIF connector
Phono (RCA) socket
AES/EBU outputs
8 channels, sync-locked to RedNet system sample rate
ADAT outputs
32 channels @ 44.1 / 48 / 88.2 / 96 kHz sample rate; 16 channels @ 192 kHz
S/PDIF output
2 channels, sync-locked to RedNet system sample rate
ADAT output connectors
TOSLINK lightguides x 8
S/PDIF connector output
Phono (RCA) socket
Input sample rate range
32 to 216 kHz
Gain error
-0.3 dB
Dynamic Range
> 138 dB (-60 dBFS method)
THD N
< -130 dB (0.00003); 0 dBFS input
AES/EBU Inputs mode
Chs. 1 to 8; ADAT inputs – Chs. 9 to 32*
AES/EBU Output mode
Chs. 1 to 8; ADAT outputs – Chs. 1 to 32*
ADAT Input mode
Chs. 1 to 32*; AES/EBU
ADAT Output mode
Chs. 1 to 8; ADAT outputs – Chs. 1 to 32*
Supported sample rates
44.1 / 48 / 88.2 / 96 / 192 kHz
Clock sources
Local or from network master device
Local clock sources
Internal, Word Clock input, AES input 1, ADAT input 1, S/PDIF input
External word clock range
Sample rate ±7.5
PSU
Internal, 100 - 240 V, consumption 30 VA
RedNet 3.4 to 3.7 Firmware Update - Rednet 1-5 Only
Rednet 1-5 Brooklyn 1 devices only
For use before installation of Rednet Control 1.8.2 & 1.9.2.
If you would like more information on how our audio solutions could add to your audio workflow, or to request a demonstration, please contact us to have one of our specialists get in touch.
Contact Us